Aurora 1030W TOC Analyzer

TOC Analyzer

Low IDL
High speed
Compliant

cot1030 Brand : OI analytical - a xylem brand

Ask for a quote

The Aurora 1030W TOC Analyzer uses the persulfate chemical oxidation technique to analyze organic contamination levels in liquid samples with reliability and accuracy. The instrument can be programmed and calibrated to analyze samples containing organic carbon at levels as low as 10 ppb and as high as 30,000 ppm at a rate of up to 300 samples in 24 hours. The reaction chamber is automatically and thoroughly rinsed between each analysis to eliminate the risk of cross contamination. This procedure also ensures that a low background is maintained, which is essential for very low TOC levels.

Aurora 1030W TOC Analyzer

Ask for a quote

Advantages

Test Methods Supported

Standard Method 5310C – Drinking Water / Wastewater
USEPA 415.3 – Drinking Water
USP <643> / EU 2.2.44 – Purified Water
ASTM D 4779 – Ultrapure Water
ASTM D 4839 – Wastewater, Seawater
USEPA-DBPR – Disinfection Byproduct Rule
USEPA-SPCC – Spill Prevention & Control Countermeasures
ISO 8245 – Drinking Water, Wastewater
EN 1484 – Surface & Ground Waters, Potable Water

Applications

Pharmaceuticals

Laboratories

Specifications

Aurora 1030W TOC Analyzer

Operating Principle	Heated sodium persulfate oxidation
Measurement Technique	Non-dispersive infrared (NDIR) detection
Measurement Range	10 ppb C – 30,000 ppm C (multiple calibration ranges or dilution required)
Instrument Detection Limit (IDL)	2 ppb C
Operator Interface	Color LCD touchscreen display with Windows® CE-based software
Operating Modes	Standalone (Windows® CE), PC-controlled, or LAN/ LIMS network connectivity
Basic Software	Single instrument operation with data transfer to PC
Optional ATOC Software	Network LAN/LIMS operation, data management, custom reports, and 21CFR11 compliance
Autosampler	88 position rotary autosampler designed to fit directly underneath Aurora 1030W analyzer
Sample Injection	Manual syringe, sipper tube, autosampler, or multistream at-line sampling module
Certification	CE, EMC: EN61326 / Safety: IEC 61010-11 2001
Reagents Required	Sodium persulfate, 5% phosphoric acid, rinsewater
Sample Injection Volume	10μL – 10mL
Method TC	Acid and persulfate reaction
Method TIC	Acidification with Phosphoric acid and sparging
Method TOC	NPOC by heated persulfate oxidation or TC-TIC
Heating	Adjustable to 100 ˚C in 1˚C increments
Repeatability	2.0% or 2 ppb, whichever is greater
Linearity	± 1% FS or 2% relative, whichever is greater
Sample pathway	Color coded Teflon® tubing
Sample handling	Syringe with isolation loop to prevent contamination
Gas Supply	N2 (99.998%), zero-grade air, or O2 (99.998%)
Power Supply	Variable voltage, 100-240VAC, 50/60 Hz, 950W
Dimensions	H 42,5 x L 49,5 x P 41,9 cm
Dimensions – Aurora 1030 + 1088 Autosampler	H 66 x L 49 x D 59 cm
Weight – Aurora 1030 + 1088 Autosampler	15.4 kg